Seamless Boiler Tube BS EN 10216-2 P265GH Size: Out Diameter 21.3-219.1mm

Product Detail

These steel grades are characterised by a good weldability. They are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. The user of these steel grades must make sure that his calculation, design and processing methods are appropriate for the material. The grades of this series offer good cold and hot-forming properties.




P265GH is a weldable non-alloy quality pressure vessel steel. P265GH has a wide application in the manufacture of pressure vessels, boilers and heat exchangers in the oil and gas industry.P265GH is also used in chemical and pharmaceutical process plants. As one of the largest manufacturer and stockists of P265GH seamless pipes, we focus on two areas. First we have a large number of very thick P265GH pipes to assist end user. Secondly we focus on the quality of our P265GH pipes and these are characterised by having a very low level of non-metallic inclusions compared to many other P265GH pipes on offer. Our best P265GH tubes are also available as HIC resistant.

P265GH is useful at moderate temperatures for pressure purposes. At the standard thickness it has a minimum yield strength of 265 MPa. It is normalised by heating to a temperature between 890 to 950°C without holding





P265GH Chemical Composition

Grade	C	Si	Mn	Mn (Min)	P	S	Al	N	Cr	Cu	Mo	Nb	Ni	Ti	V	CR+Cu+Mo+Ni
P265 GH	0.2	0.4	1.4	0.8	0.025	0.01	0.02	0.012	0.3	0.3	0.08	0.02	0.3	0.03	0.02	0.7

P265GH Physical Properties

Yield Strength
= 16	16 < t = 40	40 < t = 60	60 < t = 100	100 < t = 150	150 < t = 250
265	255	245	215	200	185
Tensile Strength